进口不锈钢潜水泵(欧美品牌)

英国GRIMM格林进口不锈钢潜水泵 UK GRIMMImported stainlesssteel submersible pump

英国GRIMM格林进口不锈钢潜水泵概述：

1、进口不锈钢潜水泵系全不锈钢精密铸造污水污物潜水电泵，采用不锈钢精密铸造外壳，具有耐腐蚀、环保型、扬程高、流量大等特点。
2、油室采用氟橡胶双面机械密封，外室采用单面氟橡胶机械油封结构，地减少因骨架油封与轴之间摩擦而造成的密封进水问题。
3、电机采用高温线，F级绝缘，热保护装置，地延长泵的使用寿命。
4、根据客户要求，可带搅匀装置，该装置随电机轴旋转产生极强的搅拌力，将污水池内的沉积物搅拌成悬浮物后排出。也可带切割装置，能将污水 中的长纤维、塑料、纸袋、稻草等杂物碎片后排出。
5、可根据客户特殊要求定制防腐蚀电缆线、四氟机封，及高温液体的件配置。

英国GRIMM格林进口不锈钢潜水泵特点：

1、不锈钢潜水泵采用独特的单叶片或双叶片叶轮结构，大大提高了污物通过能力，能的通过泵口径的5倍的纤维物质与直径为泵口径约50%的固体颗粒。
2、机械密封采用新型硬质耐腐的碳化钨材料，同时将密封改进为双端面密封，可使泵安全连续运行8000小时以上。
3、整体结构紧凑、体积小、噪声小、节能，检修方便，无需建泵房，潜入水中即可工作，大大减少工程造价。
4、不锈钢潜水泵在密封室内设置有高精度漏水检测传感器，定子绕组内预埋了热敏元件、传感器、配备控制柜，对电机超温漏水进行自动保护。
5、不锈钢潜水泵可根据用户需要配备双导轨自动耦合安装系统，它给安装、维修带来极大方便，人可不必为此而进入污水坑。
6、不锈钢潜水泵有两种不同的安装方式，固定式自动耦合安装系统，移动式自由安装系统。
英国GRIMM格林进口不锈钢潜水泵使用条件：
1、以叶轮资讯为准，潜入水下深度不得超过5m；
2、输送介质温度不高于60℃；
3、输送介质的PH值304(4-10)，316(2-13)。

英国GRIMM格林进口不锈钢潜水泵技术参数：
流 量：10-200m3/h
扬 程：7-60m
口 径：50-200mm
转 速：1450-2900r/min
功 率：0.75-15kw
电 压：220/380V
密 封：碳化钨，双端面密封
材 质：304、316
连接方式：螺纹，法兰

英国GRIMM格林进口不锈钢潜水泵用途：
适用于建筑楼宇、医院、住宅小区、市政工程、道路交通及施工、高层排污、养殖、饮料、海水盐水、一般腐蚀性介质中含有的固体颗粒、长纤维废水、污水。

UK GRIMMImported stainless steel submersible pumpsummary:

1.Imported stainless steel submersible pump is made of stainless steel, precision casting, sewage, sewage submersible pump, stainless steel precision casting shell, with corrosion resistance, environmental protection, high lift, large flow characteristics.

2.The oil chamber adopts double sided mechanical seal of fluorine rubber, and the outer chamber adopts a single fluorine rubber mechanical oil seal structure, effectively reducing the sealing water inlet problem caused by friction between the skeleton oil seal and the shaft.

3.The motor adopts high temperature line, F class insulation, thermal protection device, effectively extend the service life of the pump.

4.According to customer requirements, can be equipped with a mixing device, the device rotates with the motor shaft, resulting in a strong mixing force, the sewage tank sediment into a suspended substance after discharge. The utility model can also be provided with a cutting device, which can discharge the debris, such as long fiber, plastic, paper bag, straw and so on in the sewage.

5.According to customer special requirements customized anti-corrosion cable, PTFE sealing, and high temperature liquid parts configuration.

UK GRIMMImported stainless steel submersible pump characteristic:

1.Stainless steel submersible pump adopts the unique leaf or double blade impeller structure, greatly improve the through capacity of sewage, which can effectively through the fiber material pump 5 times the diameter of the pump diameter and about 50% of the solid particles.

2.Mechanical seal adopts new hard corrosion resistant tungsten carbide material, at the same time, the seal is improved to double end face seal, can make the pump safe and continuous operation for more than 8000 hours.

3.The overall compact structure, small size, noise, energy-saving effect is remarkable, easy maintenance, without the construction of pump room, submerged into the water can work, greatly reducing the project cost.

4.Stainless steel submersible pump is equipped with high-precision leakage detection sensor in the seal chamber, embedded in the stator winding of heat sensitive components, sensors, equipped with control cabinet, the motor overheating, leakage automatically protected.

5.Stainless steel submersible pump can be equipped with two rail automatic coupling installation system according to user's needs. It provides great convenience for installation and maintenance, and people do not need to enter the sewage pit for this purpose.

6.Stainless steel submersible pump has two different installation methods, fixed automatic coupling installation system, mobile free installation system.

UK GRIMMImported stainless steel submersible pumpuse condition:

1.In order to impeller information shall prevail, diving underwater depth shall not exceed 5m;

2.The medium temperature is not higher than 60 ℃;

3.Conveying medium pH value of 304 (4-10), 316 (2-13).

UK GRIMMImported stainless steel submersible pumptechnical parameter:

Flow rate: 10-200m3/h

Lift: 7-60m

Caliber: 50-200mm

Speed: 1450-2900r/min

Power: 0.75-15kw

Voltage: 220/380V

Sealing: tungsten carbide, double face seal

Material: 304, 316

Connection: thread, flange

UK GRIMMImported stainless steel submersible pumppurpose:

Applicable to the construction of buildings, hospitals, residential areas, municipal engineering, road traffic and construction, high-rise sewage, aquaculture, beverage, water, salt, solid particles containing general corrosive medium long fiber wastewater, sewage.