进口潜水搅拌机(欧美)

英国GRIMM格林进口潜水搅拌机 UK GRIMM Imported submersible mixer

英国GRIMM格林进口潜水搅拌机概述： 
　　   进口潜水搅拌机分为混合搅拌和速推流两大系列。
          进口潜水搅拌机是引进英国格林潜水电机密封技术研制成功的。经过多年的实践摸索，因其在形式、结构和试验方法上的创新，使得潜水搅拌机总体性能达到了国际同类产品的水平。潜水搅拌机作为水处理工艺中的关键设备之一，在水处理工艺流程中，可实现生化过程中固液二相流和固液气三相流的均质、流动的工艺要求。它由潜水电机、叶轮和安装系统等组成。潜水搅拌机为直联式结构。它与传统的大功率电机通过减速机降速相比，具有结构紧凑、能耗、便于维护保养等优点。叶轮经过精铸或冲压成型，精度高、推力大、流线性造型简洁美观。该系列产品适用于需要固液搅拌、混合的场所。

英国GRIMM格林进口潜水搅拌机性能特点：
1、结构紧凑、体积小、重量轻、操作维护简单、安装方便快捷、使用寿命长；
2、叶片具有子杰功能可防杂物缠绕、阻塞；
3、与曝气系统混合使用可使能耗大幅度降，充氧量提高，防止沉淀；
4、电机绕组绝缘等级为F级，防护等级为IP68，选用一次润滑免维护进口轴承，具有油室泄露和电机绕组过热保护功能，使电机的工作更为安全可靠；
5、机械密封的摩擦副材质为耐腐蚀的碳化钨或硬质合金，所用紧固件均为不锈钢材质。

英国GRIMM格林进口潜水搅拌机使用条件：
为了潜水搅拌机的正常工作，请选择工作环境和运行模式：
1、介质温度不超过40℃；
2、介质的PH值：5~9；
3、介质密度不超过1150Kg/m3；
4、潜水深度不超过20m。
特别提示：潜水搅拌机必须潜入水中工作，不能在易燃易爆或腐蚀性及高温的环境中工作。针对特殊环境下的要求，英国格林可为用户提供特殊设计。

英国GRIMM格林进口潜水搅拌机技术参数： 
叶轮直径：220-890mm
叶轮转速：36-980r/min
电机功率：0.85-15kw
额定电流：3.2-37.8A
额定电压：380V
额定频率：50HZ
推       力：165-4250N
防护等级：IP68
绝缘等级：F级

英国GRIMM格林进口潜水搅拌机应用范围： 
          进口潜水搅拌机主要运用在市政和工业污水处理过程中的混合、搅拌和环流，也可用作景观水环境的养护设备，通过搅拌达到创建水流的作用，改善水体质量，增加水中含氧量，阻止悬浮物沉积。

UK GRIMM Imported submersible mixer summary:

        Imported submersible mixer is divided into two series: mixing mixing and low speed pushing flow.

        Imported submersible mixer is the introduction of the British Green submersible motor sealing technology developed successfully. After many years of practice and exploration, because of its innovation in form, structure and testing methods, the performance of the submersible mixer has reached the level of international similar products. As one of the key equipments in the water treatment process, the submersible mixer can realize the homogeneous and flowing process of the solid-liquid two-phase flow and the three-phase flow of solid, liquid and gas in the process of water treatment. It is composed of submersible motors, impellers and mounting systems. The submersible mixer is a direct connected structure. Compared with the traditional high power motor through reducer, it has the advantages of compact structure, low energy consumption, easy maintenance and so on. Impeller by casting or stamping molding, high precision, thrust, flow linear, simple and beautiful shape. This series is suitable for mixing and mixing with solid liquid.

UK GRIMM Imported submersible mixer performance characteristics:

1. Compact structure, small size, light weight, simple operation and maintenance, convenient installation and long service life;

2.The blade has a sub Jie function, can prevent sundries winding, blocking;

3.Mixed with the aeration system, can greatly reduce energy consumption, increase oxygen capacity, and effectively prevent precipitation;

4.The motor winding insulation level is F, protection level is IP68, choose a lubrication, maintenance free import bearings, with oil leakage and motor winding overheating protection function, make the work of the motor more safe and reliable;

5. The friction pairs of mechanical seals are corrosion resistant tungsten carbide or hard alloy. All the fasteners are made of stainless steel.

UK GRIMM Imported submersible mixer use condition:

In order to ensure the normal operation of the submersible mixer, please select the correct working environment and mode of operation:

1.The highest medium temperature is not more than 40 degrees;

2.Medium pH value: 5~9;

3.Medium density not more than 1150Kg/m3;

4.Diving depth of not more than 20m.

Special note: submersible mixer must be fully submerged in the work, not flammable, explosive or corrosive and high temperature environment. For special environmental requirements, the British Green can provide users with special design.

UK GRIMM Imported submersible mixer technical Parameters:

Impeller diameter: 220-890mm

Impeller speed: 36-980r/min

Motor power: 0.85-15kw

Rated current: 3.2-37.8A

Rated voltage: 380V

Rated frequency: 50HZ

Thrust: 165-4250N

Protection level: IP68

Insulation class: F class

UK GRIMM Imported submersible mixer application range:

        Import diving mixer is mainly used in municipal and industrial wastewater treatment in the process of mixing, stirring and circulation, but also can be used as maintenance equipment for landscape water environment, by stirring to create the role of water, improve water quality, increase the oxygen content in the water, effectively prevent the deposition of suspended solids.