空气滤材

基础信息

节能环保型空气过滤材料，是公司开发的新型过滤材料。它集熔喷、驻极、复合技术于一体，具有率、大容尘、阻力的优良特性。初效空气滤材具有阻、、容尘量大的优良特性；熔喷复合HEPA级滤材替代玻纤滤材被广泛应用于医院、电子、生物制药、化纤等行业空气净化。中效滤材采用了双组份结构，其容尘大、阻力的特性更为，符合欧标“EN779:2012”的要求。公司研发的HEPA级吸尘器专用滤材由于使用了独特的熔喷超细纤维及驻极技术，可以达到更高的过滤效率，已通过美国“IBR”公司DEHS检测介质的检测，达到美国IEST RP CC001.5标准。

注释/Note：

 该产品是节能环保型空气过滤材料。集双组分熔喷驻极体复合技术于一体，具高、阻力、容尘量大、使用寿命长等优良特性。

 As one type ofeco-friendly energy saving air filtration media, it is correlated  among bi-component melt blown, polymerelectrets and laminated technology and is up to the latest standard of EU EN779being characteristic of high efficiency ,low resistance, large dust-holdingcapacity and long life.

 TD-B及B-Ⅱ系列产品由高容尘层与过滤层组成，具有容尘量高的特点。

 B-II series consistof  high dust-holding layer and  filter layer to exhibit prominentdust-holding capacity.

  C-Ⅲ型材料则由双组分(PP和PET)组成，PET材料(聚酯)在该材料中起到了支撑骨架的作用，提高了过滤层的挺度，令该材料在效率的同时具有更的阻力。

 C-III series consistof bi-component including PP and PET which are as a supporting member to increase stiffness in revealing highefficiency and low resistance synchronously.

 C-Ⅳ系列产品采用双组份熔喷生产工艺，三维卷曲的熔喷超细纤维赋予非织造布良好的过滤性能，而高弹短纤维则提高了非织造布的压缩回弹性，两种纤维采用“Z型”结构相结合，制备出的双组份熔喷非织造布滤材具有较高的透气性和容尘性，同时降了使用过程中的阻力压降，是一种新型的高容尘阻过滤材料。

 C-IV series are alsoin bi-componont structure, in that, the super-fine MB fiber give the nonwovenhigher filtration efficiency rate and the 3D crimp staple fiber convey excelentcompression resilince property. The two fibers are blended in structure of"Z" shape,which makes the filter media featured with higher airpermeability and dust holding capacity, more importantly, it can decrease thepressure drop raising up during its using. So C-IV is a newly developed filtermedia for the applications requesting higher dust holding and low reistancesynchronously.

 C-V型材料是为的EN779: 2012标准特制而成，该系列产品采用双组份熔喷生产工艺，熔喷超细纤维与短纤维以“Z型”结构相结合，利用非织造布自身的物理结构和后期驻极加电，获得较高的过滤效率与较的阻力压降，静电消除后，依然拥有较高的过滤效率。

 C-V series arespecially developed for the up-to-date European Standard EN779:2012. Theyconsist of bi-component: super-fine PP meltblown and PET staple fiber, whichare blended in structure of "Z" shape. By using the media's physicaland mechanical structure mainly, and just the electret charge by a little, thefabric can achieve very high efficiency with lower resistance. Afterdischarging,  the C-V media can stillmeet to the minimum efficiency level according to the EN779:2012.

  该材料能够以单层卷材、筒状卷材、袋状滤材等多种形式供应。其中以袋状形式滤材更是受到用户的青睐,由超声波复合设备一次性在线裁片，可直接上框组装成过滤器。

  It can be ordered in severaltypes: flat sheets material in rolls , filtering cartridge and preformedpockets in rolls (ultrasonic welded) etc.Separate pocket which is ultrasonic welded  to frame up conveniently is becoming more andmore popular.

  B系列、B-Ⅱ系列、C-Ⅲ系列检测仪器为TSI-8110，气溶胶类型为NaCl，粒径0.3μm。

  B series，B-Ⅱseries，C-Ⅲ series ,Tester is TSI-8110 and aerosolis Nacl @ 0.3µm

  C-Ⅳ系列、C-Ⅴ系列检测仪器为TSI-8130，气溶胶类型为NaCl，粒径0.26μm。

  C-Ⅳ series，C-Ⅴ series ,Tester is TSI-8130 and aerosol is Nacl @ 0.26µm

  颜色标识可根据客户要求个性定制。

  The color identification of the product depends on customer's requestindividually.

  送风温度≤80°C。

  Airflow   temperature≤80°C

  本材料标准长度50-100米/卷，宽度0.65-0.75米或1.5米。

  Standard length:50-100m/roll  Width0.65-0.75m or 1.5m.